クラス RemoveTabPanel
java.lang.Object
jp.ne.mki.wedge.rule.base.AbstractBase
jp.ne.mki.wedge.rule.base.AbstractClient
jp.ne.mki.wedge.rule.client.component.tab.RemoveTabPanel
- すべての実装されたインタフェース:
ClientInterface,CommonInterface,jp.ne.mki.wedge.run.interfaces.RuleEngineInterface
タブからパネルを除去する
タブコンポーネントからパネルを取り除きます。
このロジッククラスは、「タブを取り外した後、元から選択されていたPanelが
タブ上に存在した場合は、そのパネルを選択状態とする。」
という動作をするため、ChangeListenerをあらかじめ全てRemoveしてから、
このロジッククラスは動作いたします。
(ロジッククラスの処理を終了後、ChangeListenerを再設定します。)
このロジッククラスを実行時、タブ上にフォーカスがある場合は、
タブを取り外したタイミングで、フォーカスが別のコンポーネントに
移動してしまいます。
これにより何らかのイベントが二次的に発生する可能性もあるため、
タブ上にフォーカスがある状態では このロジッククラスの使用は控えてください。
[I/O RECORD]
| InputRecord | OutputRecord |
|---|---|
|
[RULE PARAMETER]
| Parameter |
|---|
- 導入されたバージョン:
- 1.2.0
- バージョン:
- 1.0
-
フィールドの概要
クラスから継承されたフィールド jp.ne.mki.wedge.rule.base.AbstractBase
controlRecord, engineManager, errorMessage, executeType, id, inputRecord, logicalName, logicClassDelegate, outputRecord, physicalName, ruleParameter, ruleType, serverParameter, userConstantインタフェースから継承されたフィールド jp.ne.mki.wedge.rule.base.interfaces.ClientInterface
FRAME_CLOSE, FRAME_QUIT, SKIP_ALL, STOP, STOP_SELECT_ALL, SYSTEM_EXIT, SYSTEM_QUIT, TIMING_AFTER, TIMING_BEFORE, TIMING_LOAD, TIMING_ROW_CLICK, TIMING_ROW_WCLICK, TIMING_UN_LOADインタフェースから継承されたフィールド jp.ne.mki.wedge.rule.base.interfaces.CommonInterface
CANCEL, ERROR, EXECUTE_BOTH, EXECUTE_CLIENT, EXECUTE_DEBUG, EXECUTE_HTMLGATEWAY, EXECUTE_SERVER, EXECUTE_SERVERDC, IO_ERROR, IO_ERROR_EXECUTE_PARAMETER, IO_ERROR_IN, IO_ERROR_IO_MUST_SAME_COUNT, IO_ERROR_ITEM_TYPE, IO_ERROR_OUT, IO_ERROR_PARAMETER, NONE, OK, PARAMETER_DELIMITER, SKIP, USER_ERROR -
コンストラクタの概要
コンストラクタ -
メソッドの概要
修飾子とタイプメソッド説明intexecute()処理を実行。voidexit()終了処理。intIOパラメータ取得。protected intloopOutItemSub(jp.ne.mki.wedge.run.client.data.Item item, int index) loopOutRecord()から呼び出されるメソッドです。クラスから継承されたメソッド jp.ne.mki.wedge.rule.base.AbstractClient
executeCurrentAfter, executeRule, executeRule, getAdapterName, getClientRuleObject, getComponent, getComponent, getComponents, getConfig, getConfImagePath, getContentPane, getCurrentComponent, getDesktop, getExecuteIndex, getExecuteParameter, getExecuteTiming, getExecutions, getExpectNextComponent, getFrame, getFrameRunner, getImageIcon, getInItem, getInItem, getItems, getLogicClassType, getManager, getMemory, getOutItem, getOutItem, getParameter, getReturnString, getRevision, isApplet, isApplication, isClientTraceMode, isConpiled, isJWS, isServerTraceMode, isWeb, log, loopInItem, loopInItemSub, loopInOutItem, loopInOutItemSub, loopOutItem, setEngineManager, setErrorMessageMustInComp, setErrorMessageMustOutComp, setExecuteParameter, setFocus, setFocus, setFocus, setFrameRunnerErrorStatus, setPropertyFromEngine, setStatusBarText, showErrorDialog, showFrame, showFrame, showFrame, showFrame, terminate, writeErrorLog, writeErrorLog, writeErrorLog, writeTraceLogクラスから継承されたメソッド jp.ne.mki.wedge.rule.base.AbstractBase
callDispose, checkDelegate, createErrorMessage, createLogicErrorLogRecord, createLogicExceptionLogRecord, createLogicLogRecord, dataClearOfOutRecord, dataClearOfRecord, dispose, getAppAccount, getAppAuthority, getAppMenu, getAppPassword, getClassErrorName, getClientId, getConnectionId, getConnectionPoolId, getConstantKeys, getConstantValue, getConstantValueAsStringArray, getControlRecord, getDbAccessCount, getDbErrorCode, getDbErrorMessage, getDbStatus, getDbUpdatedRecordCount, getEngineManager, getErrorMessage, getErrorMessage, getErrorMessage, getExceptionMessage, getExecuteType, getId, getInputRecordIterator, getInRecord, getInRecord, getInRecord, getInRecordCount, getInRecordList, getIpAddress_G_Index, getIpAddress_P_Index, getLogicalErrorName, getLogicalName, getLogicClassDelegate, getOutputHtml, getOutputRecordIterator, getOutRecord, getOutRecord, getOutRecord, getOutRecordCount, getOutRecordList, getPhysicalErrorName, getPhysicalName, getProjectId, getQueryEndLine, getQueryMaxCount, getQueryPageCount, getQueryStartLine, getRowSize, getRowSizeOfInRecord, getRuleParameter, getRuleParameters, getRuleParameters, getRuleParameters, getRuleType, getRuleTypeName, getServerMessage, getServerParameter, getServerStatus, getServerSubName, getServerSubRevision, getServerTran, getUpdateErrorLine, getUpdateTargetCount, getWebServerIpAddress, isExecutable, isJDK15, log, logDebug, logError, logError, logFatal, logFatal, logInfo, logTrace, logWarn, logWarn, loopInOutRecord, loopInOutRecordSub, loopInRecord, loopInRecordSub, loopOutRecord, loopOutRecordSub, setControlRecord, setErrorMessage, setErrorMessageMustInRecord, setErrorMessageMustOutRecord, setErrorMessageMustParamIsNumber, setExecuteType, setFatalError, setId, setInRecord, setLogicalName, setLogicClassDelegate, setOutputHtml, setOutRecord, setPhysicalName, setRuleParameter, setRuleType, setServerParameter, setUserConstant, showErrorDialog, showErrorDialogAddRuleName, writeErrorLog, writeErrorLog, writeLog, writeLog, writeLog, writeTraceLogクラスから継承されたメソッド java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, waitインタフェースから継承されたメソッド jp.ne.mki.wedge.rule.base.interfaces.CommonInterface
dispose, getAppAccount, getAppAuthority, getAppMenu, getAppPassword, getClassErrorName, getClientId, getConnectionId, getConnectionPoolId, getDbAccessCount, getDbErrorCode, getDbErrorMessage, getDbStatus, getEngineManager, getExceptionMessage, getExecuteType, getId, getInRecord, getInRecord, getInRecord, getInRecordCount, getIpAddress_G_Index, getIpAddress_P_Index, getLogicalErrorName, getLogicalName, getOutRecord, getOutRecord, getOutRecord, getOutRecordCount, getPhysicalErrorName, getPhysicalName, getProjectId, getQueryEndLine, getQueryMaxCount, getQueryPageCount, getQueryStartLine, getRuleParameter, getRuleParameters, getRuleType, getRuleTypeName, getServerMessage, getServerParameter, getServerStatus, getServerSubName, getServerSubRevision, getServerTran, getUpdateErrorLine, getUpdateTargetCount, getWebServerIpAddress, isExecutable, logDebug, logError, logError, logFatal, logFatal, logInfo, logTrace, logWarn, logWarn, setExecuteType, setRuleType, setServerParameter, showErrorDialog, showErrorDialogAddRuleName, writeErrorLog, writeLog, writeLog, writeTraceLogインタフェースから継承されたメソッド jp.ne.mki.wedge.run.interfaces.RuleEngineInterface
createLogicErrorLogRecord, createLogicExceptionLogRecord, createLogicLogRecord, getLogicClassDelegate, setControlRecord, setId, setInRecord, setLogicalName, setLogicClassDelegate, setOutRecord, setPhysicalName, setRuleParameter, setUserConstant
-
コンストラクタの詳細
-
RemoveTabPanel
public RemoveTabPanel()
-
-
メソッドの詳細
-
getIOParameter
インタフェースからコピーされた説明:CommonInterfaceIOパラメータ取得。executeの前に実行される。- 戻り値:
- int OK=処理続行、IO_ERROR=入出力レコードエラー、IO_ERROR_IN=入力レコードエラー、IO_ERROR_OUT=出力レコードエラー、 IO_ERROR_IO_MUST_SAME_COUNT=入力レコード数と出力レコー数の非合致エラー、IO_ERROR_PARAMETER=パラメータエラー、 IO_ERROR_EXECUTE_PARAMETER=実行リストパラメータエラー
- 例外:
Throwable- 関連項目:
-
execute
インタフェースからコピーされた説明:CommonInterface処理を実行。- 戻り値:
- int OK=処理続行、ERROR=異常終了、CANCEL=処理を中断(正常終了)、SKIP=次行を実行しない、USER_ERROR=戻り値をユーザ側で任意に設定
- 例外:
Throwable- 関連項目:
-
loopOutItemSub
protected int loopOutItemSub(jp.ne.mki.wedge.run.client.data.Item item, int index) クラスからコピーされた説明:AbstractClientloopOutRecord()から呼び出されるメソッドです。ユーザが任意に記述をします。- オーバーライド:
loopOutItemSubクラス内AbstractClient
-
exit
インタフェースからコピーされた説明:CommonInterface- 例外:
Throwable- 関連項目:
-